For a straight forward, all-inclusive solution to rainwater storage,
the 3P Technik Rain Tank Systems are the ideal package. Just specify
the number of tanks you want to buy and the correct package will
consist of all the parts, tanks and connectors you need, making the
buying
process much simpler. Also included in these packages is a Garden
Steelpump to give you great water pressure from a hose, thereby saving
your
arms and back aching from carrying a watering can.
Large rainwater storage tanks plus accessories in a single
package
These systems offer all the parts you need to create a simple, scalable
water collection and storage system. One of the great benefits of a
large volume storage and pump combination is that you can water your
garden for a meaningful amount of time. If you own a standard 190 or
200 litre water butt and connect a pump (like the Garden Steelpump that
we
supply) to it then a full water butt will be emptied in less than 4
minutes. How far will that get you? With our systems, each tank offers
just under a quarter of an hour of watering with a pump. So for example
if you have a three tank system which starts full, then
you can water your garden for 5
minutes per day, and it will keep going until the ninth day.
The premium quality wall tank is a big step up from a standard water
butt. It provides capacity for 750 litres (165 gallons) of garden
rainwater in a small footprint. This tank is suitable for watering-can
use or pumping, and is made from polyethylene. When empty each tank
weighs a pretty solid 38kg. The dimensions of the tank are 800mm x
600mm x 1790mm - so its just
short of six feet tall! The
Water
Tank is available in four colours:
Matt black, Sandstone (yellow/brown), Granite (grey), and British
Racing Green. Please choose your colour preference at the bottom of
this page.
Each tank comes with a 3/4 inch brass tap connector on the front (with
a basic hi-flow tap supplied), and two more 3/4 inch brass tank
interconnecting points (one each side). Also supplied are a metal
retention bracket, hole saw and rubber grommet sealing ring (for use
with the 3P Filter Collector).
The inclusion of a
powerful
Garden Steelpump
means that you can enjoy the pressure and convenience of mains water
while you are actually using free rainwater. Simply connect a hose or
tap to the pump and it will run when you open the tap and automatically
shut off when you close it, so there is no need to run and switch the
pump off. The pump can supply water at 4 bar of pressure
allowing
it to push water uphill as high as 40 metres. Using the
pump, the flow rate through a 1/2 inch hosepipe is similar to mains
water. The pump requires filtered water so we include a filter
collecter to remove leaves and debris before they get into the tank.
Pump technical details:
- Power rating: 600W
- Weight: 15kg
- Maximum flow rate: 3,000 litres/ hour
- Supply voltage: 230/240V
- Water resistance: IP68 (it is submersible)
- Power cable: 10 metres in length
- Inlet
- 1" Female BSP
- Outlet - 1.25" Female BSP
- Dimensions: Length - 477mm, Width - 200mm, Height - 226mm
What's included in the Rain Tank Systems?
Each
system includes one or more 750 litre (165 gallon) tanks in either
black, grey, green
or sandstone colour (please choose at the bottom of this page), a sight
gauge (since the tanks have no lids this gauge will show you the water
level), the Garden Steelpump, easy-fit pump connection point with shut
off valve, a rainwater filter-diverter (which you install on the
down-pipe), and a 3/4 inch hi-flow tap.
 |
The filter collector cleanses the rainwater before
diverting it
sideways into the tank, while leaves and debris continue down to the
drain. When the Rain-Tanks are full the filter collector automatically
sends excess rainwater to the drain as usual. The unique removable
filter cartridge can be taken out in seconds for cleaning. Note that
this filter collector will also fit square downpipes of width between
65mm and 75mm. |
 |
This outlet multi hosetail connection from the pump
allows you to use 1/2 inch (13mm), 3/4 inch (19mm) or 1 inch (25mm)
hoses. |
 |
The Rain Tank System has a compact, sturdy metal valve
and simple,
reliable brass connector enabling you to shut off the outlet from the
Rain Tank and disconnect the pump for storage. The connection kit also
includes 1 metre of heavy duty 1 inch hose. |
 |
The Tank to Tank connection kits consist of sturdy 25mm
diameter hoses with metal threaded connectors. |
Please choose your model using the table below as reference. Note that
you will need to specify the colour of tank(s) that you would like at
the bottom of this page.
| Model |
Description |
| System 750 |
A one tank system consisting of one 750 litre
3P Technik Wall Tank (water butt), one filter collector, one sight
gauge, one Garden Steelpump, one tank to pump connection kit, and an
outlet multi hosetail connector (to fit one inch, 3/4 inch and 1/2 inch
garden hoses) |
| System 1500 |
A two tank system consisting of two 750 litre
3P Technik Wall Tanks, one filter collector, one sight
gauge, one tank to tank
connector kit, one Garden Steelpump, one tank to pump
connection kit, and an
outlet multi hosetail connector (to fit one inch, 3/4 inch and 1/2 inch
garden hoses) |
| System 2250 |
A three tank system consisting of three 750 litre
3P Technik Wall Tanks, one filter collector, one sight
gauge, two tank
to tank connector kits, one Garden Steelpump, one tank to pump
connection kit, and an
outlet multi hosetail connector (to fit one inch, 3/4 inch and 1/2 inch
garden hoses) |
| System 3000 |
A four tank system consisting of four 750 litre
3P Technik Wall Tanks, one filter collector, one sight
gauge, three tank
to tank connector kits, one Garden Steelpump, one tank to pump
connection kit, and an
outlet multi hosetail connector (to fit one inch, 3/4 inch and 1/2 inch
garden hoses) |
| System 3750 |
A top end, five tank system consisting of five 750 litre
3P Technik Wall Tanks, one filter collector, one sight
gauge, four tank
to tank connector kits, one Garden Steelpump, one tank to pump
connection kit, and an
outlet multi hosetail connector (to fit one inch, 3/4 inch and 1/2 inch
garden hoses) |
Note: if you don't want the full system including a pump, have a look
at our offers on
tanks only by clicking here. The images below show an old
model of pump. The
Garden Steelpump supplied is the
silver model shown in the image at the top of this page.