The
Polybutt 110 is an innovative take on a classic product. Instead of
making their water butt in the traditional green "dustbin" design, the
clever people at Polytank have made it in a wood grain effect to give
it a "rustic" feel. The Polybutt 110 is a
complete kit,
including all
the parts you need to start harvesting rain to give yourself a free
supply of water for garden irrigation, or car
washing.
A well thought out and designed water butt
The
Polybutt 110 water butt holds 110 litres (24 Gallons) of rainwater when
full and stands 1.2 metres high (48 inches). It is ideal for the small
garden, or where you have a small roof area
collecting water.
The
diameter of the water butt is just 430 mm (17 inches) so it really can
be tucked away into small corners. The design is that of a stretched
water butt, with a wood grain effect. You can choose from five colours:
recycled Black - Oak Effect - Green - Pine Effect and Washed Terracotta
(please choose from the dropdown box at the bottom of the page) to fit
the
brick, stone, or foliage where you locate it.
All Polybutt
products come complete with a matching stand, tap, lid and
rainsaver
water diverter. The water butt has two pre-drilled holes
(one plugged)
for ease of fitting. The lid is secured with four 8mm arrow clips to
make it child friendly (you cannot remove the lid without
gently
prising it open). All you need is a few minutes to set it up, and you
will be that bit closer to water independence. Read our
guide
to water butts here.
Strong and designed to last
The
Polybutt 110 is made using rotational moulding. This is important
because it makes a much stronger
water
butt than the alternatives of
injection moulding or blow moulding. Indeed this water butt has been
made in such a way that the lid is actually designed to take the weight
of a flower pot. The Polybutt is made from fully UV stabilised
LLDPE (linear low density polyethylene) so it should have a good 10-15
year life, unlike its cheaper alternatives. Also unlike many of the
other water butts we sell, the Polybutt is made in England, so it has a
smaller carbon footprint.
Specification
|
Water Butt |
|
Stand |
|
|
Litres |
Gallons |
|
|
| Capacity |
110 |
24 |
|
|
|
mm |
Inches |
mm |
Inches |
| Diameter |
430 |
17 |
430 |
17 |
| Height |
910 |
36 |
300 |
12 |
|
Kg |
|
Kg |
|
| Weight |
4 |
|
3 |
|
Please note, delivery is to mainland UK only (ex Scottish Highlands).
If you live in the Highlands or islands please contact us for a
delivery charge.
