The 3P Wall Tank is the answer for the homeowner who is serious about
storing rainwater. It holds 800 litres (some four times the volume of
a standard domestic water butt). Multiple Wall tanks can be joined
together to offer plenty of water for your
garden long into a drought or dry spell.
The water tank is a practical alternative to underground
rainwater systems
This premium quality wall tank is a big step up from a standard water
butt. It provides capacity for 800 litres (176 gallons) of garden
rainwater in a small footprint. This tank is suitable for watering-can
use or pumping, and is made from polyethylene. When empty the
container weighs a pretty solid 38kg.
The
dimensions of the tank are 800mm x 600mm x 1790mm - so its just short
of six feet tall! The Wall Tank is available in four colours: Matt
black, Sand (yellow/brown), Granite (grey), and British Racing
Green. Please choose your colour preference at the bottom of this page.
Each tank comes with a 3/4 inch brass tap connector on the
front (with a basic hi-flow tap supplied), and two more 3/4 inch brass
tank interconnecting points (one each side). Also supplied are a metal
retention bracket, hole saw and rubber grommet sealing ring (for use
with the 3P Filter Collector). There is a 9.5cm wide hole on top with
dust cap lid - truly child safe.
Filter collectors and linking kits
We strongly recommend
that you use this wall tank with the 3P Filter Collector which is
available in 4 colours (Grey, black, White and Brown). The filter
collector is installed in the down-pipe, to cleanse the rainwater
before diverting it sideways into the wall tank, while leaves and
debris continue down to the drain. It will fit a 68-100 mm diameter
round downpipe and a
65-75mm square down pipe. Please remember to choose a colour
at the bottom of this page.
The
filter collector allows you to connect the Wall Tank to the downpipe if
it is located directly next to it. If you need to position your Wall
Tank a distance away from the downpipe (perhaps your drain cover stands
proud or positioning the Wall tank adjacent to the downpipe
would
block a window) then you will need a
3P Long Link Kit,
available in 1 meter, 2 meter, or 5 meter lengths. The Wall
Tank
is a sealed unit (having only a 9.5cm hole on top), so this special
kit does not require a backnut.
The 3P Wall Tanks really excel
when they are connected together to provide storage of multiples of 750
litres. To do this you will need a
Tank
to Tank Connection Kit. One kit connects two tanks, so to
connect three tanks you will need two kits and so on.
 |
 |
 |
| 3P
Long Link Kit (shown on a filter connector) |
Two
Wall Tanks connected together |
3P
Tank to Tank connection kits in use |
If you plan to buy more than one of these tanks to create a large
volume water storage setup, then consider our pre-configured
rain
tank systems which include a pump. Click here to learn more.
Delivery
This Water Butt is a large and heavy product so it
will be
sent by courier. This means that deliveries to the
Highlands of Scotland or any offshore location will incur an additional
charge. If you would like delivery to the Highlands or Islands please
call us before ordering and we can quote you the additional delivery
charge.
