GAZELLE Pedal Power Generator manualThe PowerPlus Gazelle uses an efficient pedal generator for
electricity
generation to charge its 7Ah/12V VRLA Power Centre. The Gazelle can
also be charged using the included AC-charger or a DC-Car charger (not
included). The Gazelle is specifically designed for exercise, energy
saving, environmental protection, and emergency. It allows you to use
all electrical applications up to 100 Watts wherever you are. The
Gazelle can power or charge batteries, mobile phones, CD players,
I-pod, MP3, MP4, PDA, PS3, Digital Cameras, Shavers, Gameboys, Mini
speakers, Notebooks, Digital videos, Electric fans, desk lamps etc.
Gazelle Product functions:
Gazelle Product features:
USER MANUAL:1. ChargingA. PedallingPlace the Power Centre in the Pedal Power Generator cradle (picture F) and slide it (20) softly in the direction of the pedals (picture D) until it locks. Pull out the supports (14) from underneath both sides of the Pedal power Generator (picture D). Connect the power cable into the DC-Out (18) of the Pedal Power Generator and into the DC-In of the Power Centre (14)(picture D). The complete unit is now ready for charging. Rotate the pedals with a speed of 45-90 rotations per minute, either forwards of backwards. The Power Capacity LED’s (13) Red and Green will illuminate and indicates the exact amount of power going into the Power Centre. The Power Centre is completely loaded when all 4 green LED’s are illuminated. The Power Capacity Led’s will only illuminate during charging.![]() B. By AC-ChargerConnect the AC-Charger to the mains. Connect the other end of the AC-Charger into to DC-in of the Power Centre (14). The red LED on the Power Capacity LED will illuminate during charging. The Power Centre is completely loaded when all 4 green LED’s are illuminated.C. By DC-Car Charger (optional)Connect the DC-Charger into the car cigarette charger. Connect the other end of the DC-Charger into to DC-in of the Power Centre (14). The red LED on the Power Capacity LED will illuminate during charging. The Power Centre is completely loaded when all 4 green LED’s are illuminated2. Use of the LED lightAfter charging is complete disconnect the Power Centre. To use the LED light turn the light switch (7). You can choose to use 5 or 9 LED’s.3. Use of the Power CentreUse the AC/DC Power selection (12) to choose the appropriate power you want to use. Turn on the open/ close switch (9) to open the protective cover (4) of the Power Centre.AC-power output (3): Able to supply electricity to AC 230V appliances under 100 Watts DC-power output (5): Choose with the DC-voltage selection (2) the correct voltage. Connect the charge connector to the DC output (5) USB-power output (6): Connect your USB-charging cable to the USB output port (6) Power information of the Power Centre fully charged
4. Storage cabinTurn the switch (11) to open the cabin.Note:
Main Technical Parameters:
|
Copyright © 2012
![]() |
Copyright ©
2012 My Greener Home. Powered by Zen
Cart.
Call us on 020 8133 9002 - we love to talk Supporters of Gooshing and The Chimney Balloon Store |
|













