Bye Bye Standby In Ceiling Transformer


Sold Out
satisfaction guaranteed
Share on Facebook   Tweet This Page  


The Bye Bye Standby In-ceiling Transformer allows you to control low voltage halogen lights by remote control. The installation of the In-ceiling transformer is straight forward and once installed, you will be able to switch your lights on and off using a Bye Bye Standby remote control, wall switch or key fob. The Bye Bye Standby In-ceiling Transformer is suitable for lights up to 150W maximum.

A Switch and Dimmer control for Low Voltage Halogen Lights

The In-Ceiling Transformer replaces existing low voltage halogen transformers with an energy saving alternative. It allows you to control low voltage halogen lights wirelessly and save electricity. You can turn on, off and control the brightness of your light using a remote control, wireless wall switch, motion sensor, or online controller. Operating range is up to 10 metres, and it works through walls and ceilings (with reduced range).

There are alternatives but we sell Bye Bye Standby

Bye Bye Standby is a range of products that allow you to remotely control electrical appliances by cutting power to the devices plugged into them when they are not in use. This saves the electricity used by the devices that would have been consumed while they are in Standby mode. Leaving them on standby unnecessarily uses electricity costing you money and contributing to Carbon Dioxide (CO2) emissions. Bye Bye Standby requires no installation: the simplest products in the range plug into an existing socket to convert it to remote control. Standby saving is highlighted by the Energy Saving Trust as a key energy saving tip.

Leaving a typical home entertainment system - TV, DVD, digital TV receiver and hi-fi - on standby when not in use can cost £40 a year according to a report from the consumer magazine, Which?, and be responsible for 245kg of carbon dioxide emissions. Using a Bye Bye Standby products to quickly and conveniently switch this equipment off when not in use could save you more than £40 a year and eliminate the carbon dioxide emission.

We used to sell "Standby Buster", and we can still offer the Ecosaver remote control socket system if you want it. But Bye Bye Standby has one difference that makes it notably better: Enistic (the company that makes it) also sell products that extend the range in several great ways. Click here for more information.


  • Replace existing halogen transformer with this unit
  • Select the unit and house code using a dial on the under side of the unit


  • In the interests of safety, please switch off power before connection.
  • Do not overload, suitable for low voltage halogen lights up to 150W
  • Keep away from all sources of water, moisture or flammable products.
  • Do not place two receivers within an distance of 1 meter from each other.
  • Use only as directed.

If you are unsure about any aspect of the installation or operation of this product, you should contact a suitably qualified electrician.


  • Frequency: 433.92MHz
  • Requires a neutral connection
  • Operating Voltage: 220V - 240V, 50 Hz
  • 256 Digital Codes
  • Max load: 150Watts (low voltage halogen lights only)
  • Designed in the UK, made in China

  • Manufactured by: Bye Bye Standby